Publications

Published in ISI journals:

F. Shahram Forouz, S. M. Hejazi, A. Taherizadeh, (2021), Evaluating the Tribological and Mechanical Properties of Filament Wound Composite Incorporated with PTFE Fibers and Tungsten Carbide Filler Applicable for Self-Lubricating Bearings, Surface Topography: Metrology and Properties,  https://iopscience.iop.org/article/10.1088/2051-672X/ac22f2/meta

N. Zamani, A. Taherizadeh, A. Maleki, (2021), Manufacturing and characterization of Sn-0.6Al lead-free composite solder using Accumulative Extrusion Process, Journal of Electronic Materials, http://link.springer.com/article/10.1007/s11664-021-09143-9

H. K. Isaa, A. Taherizadeh, A. Maleki, (2020), Atomistic-level study of the mechanical behavior of amorphous and crystalline silica nanoparticles, Ceramics International, Vol. 46, No. 13, https://doi.org/10.1016/j.ceramint.2020.05.272.

M. Mikelani, M. Panjepour, A. Taherizadeh, (2020), Investigation on mechanical properties of nanofoam aluminum single crystal: using the method of molecular dynamics simulation, Applied Physics A, Vol. 126, No. 12, https://doi.org/10.1007/s00339-020-04105-0.

M. Daavari, M. Atapour, M. Mohedano, R. Arrabal, E. Matykina, A. Taherizadeh, (2020), Biotribology and biocorrosion of MWCNTs-reinforced PEO coating on AZ31B Mg alloy, Surfaces and Interfaces, Vol. 22, https://doi.org/10.1016/j.surfin.2020.100850.

T. Salehi, A. Taherizadeh, A. Bahrami, A. Allafchian, V. Ghafarinia, (2020), Toward a Highly Functional Hybrid ZnO Nanofiber–rGO Gas Sensor, Advanced Engineering Materials, Vol. 22, https://doi.org/10.1002/adem.202000005.

B. Sadeghian, A. Taherizadeh, M. Atapour, (2018), Simulation of weld morphology during friction stir welding of aluminum- stainless steel joint, Journal of Materials Processing Technology, Vol. 259, https://doi.org/10.1016/j.jmatprotec.2018.04.012.

A. Bagheri, M.R. Toroghinejad, A. Taherizadeh, (2018), Effect of roughness and surface hardening on the mechanical properties of three-layered brass/IF steel/brass composite, Transactions of the IIM, Vol. 71, No. 9, https://doi.org/10.1007/s12666-018-1351-7.

H. K. Isaa, A. Taherizadeh, A. Maleki, A. Ghaei, (2018), Synthesis and characterization of Al/(SiO2)np composite by powder-in-tube method, Transactions of the IIM, 71, https://doi.org/10.1007/s12666-017-1178-7.

H. K. Isaa, A. Taherizadeh, A. Maleki, (2017), Development of an aluminum/amorphous nano-SiO2 composite using powder metallurgy and hot extrusion processes, Ceramics International, Vol. 43, No. 17, https://doi.org/10.1016/j.ceramint.2017.06.057.

A. Maleki, A. Taherizadeh, N. Hosseini, (2017), Twin Roll Casting of Steels: An Overview, ISIJ International, Vol. 57, No. 1, https://doi.org/10.2355/isijinternational.ISIJINT-2016-502.

Etesmai S.A., Enayati M.H., Taherizadeh A., Sadeghian B., (2016), The Influence of Volume Fraction of Martensite and Ferrite Grain Size on Ultimate Tensile Strength and Maximum Uniform True Strain of Dual Phase Steel. Transactions of the IIM, 69, https://doi.org/10.1007/s12666-015-0739-x.

Taherizadeh A., Green D.E., Yoon J.W., (2015), A non-associated plasticity model with anisotropic and nonlinear kinematic hardening for simulation of sheet metal forming, International Journal of Solids & Structures, 69, 370-382, https://doi.org/10.1016/j.ijsolstr.2015.05.013.

Ghaei A., Taherizadeh A., (2015), A two-surface hardening plasticity model based on non-associated flow rule for anisotropic metals subjected to cyclic loading. International Journal of Mechanical Sciences, 92, 24-34, https://doi.org/10.1016/j.ijmecsci.2014.11.017.  

Rasoli M.A., Moshref-javadi M., Taherizadeh A., (2014), Investigation of ultrasonic vibration effects on the microstructure and hardness of aluminum alloy 2024 tube spinning parts, International Journal of Advanced Manufacturing Technology, 77, 2117-2124, https://DOI 10.1007/s00170-014-6500-5.

Samadi Shahreza Z., Dini G., Taherizadeh A., (2013), Improving the microstructure, mechanical and magnetic properties of AISI 4340 steel using the heat treatment process, International Journal of Iron and Steel Society of Iran, 10, 18-22, https://journal.issiran.com/article_10652.html.

Rasoli M.A., Abdullah A., Farzin M., Fadaei Tehrani A., Taherizadeh A., (2012), Influence of ultrasonic vibrations on tube spinning process. Journal of Materials Processing Technology, 212, 1443-1452, https://doi.org/10.1016/j.jmatprotec.2012.02.006.

Taherizadeh A., Green D.E., Yoon J.W., (2011), Evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity, International Journal of Plasticity, 27, 1781-1802, https://doi.org/10.1016/j.ijplas.2011.05.001.

Ghaei A., Green D.E., Taherizadeh A., (2010), Semi-implicit numerical integration of Yoshida-Uemori two-surface plasticity model. International Journal of Mechanical Sciences, 52, 531-540, https://doi.org/10.1016/j.ijmecsci.2009.11.018.  

Taherizadeh A., Green D.E., Ghaei A., Yoon J.W., (2010), A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming. International Journal of Plasticity, 26, 288-309, https://doi.org/10.1016/j.ijplas.2009.07.003.

Taherizadeh A., Ghaei A., Green D.E., Altenhof W.J., (2009), Finite element simulation of springback for a channel draw process with drawbead using different hardening models. International Journal of Mechanical Sciences, 51, 314-325, https://doi.org/10.1016/j.ijmecsci.2009.03.001.

Taherizadeh A., Najafizadeh A., Shateri R., Jonas J.J., (2006), Comparison of mechanical and metallurgical properties of hollow and solid forged products. Journal of Materials Processing Technology, 178, 181-187, https://doi.org/10.1016/j.jmatprotec.2006.03.158.

Published in international conferences (selected):

A. Bagheri, M.R. Toroghinejad, A. Taherizadeh, (2018), Investigation of formability of three-layered brass-IF steel-brass composite, Modares Mechanical Engineering, Vol. 18, No. 4, 32-38.

A. Bagheri, M.R. Toroghi, A. Taherizadeh, (2018), Investigation of the mechanical properties of cold rolled Brass and IF steel by CRB process, Journal of Welding Science and Technology of Iran, 3, 79-89.

B. Sadeghian, M. Atapour, A. Taherizadeh, (2018), Thermal simulation of FSW of 304 stainless steel to AA5083 dissimilar joint, Journal of Computational Methods in Engineering, 36, 101-117.

B. Sadeghian, A. Taherizadeh, M. Atapour, T. Salehi, M. Nosouhian, (2017), Simulation and modeling of friction welding of stainless steel to aluminum alloy using finite element method and artificial neural network, Journal of Welding Science and Technology of Iran, Vol. 3, No. 1, pp. 88-98.

A. Moshiri, A. Taherizadeh, M. Meratian, A. Maleki, (2017), Effect of compound casting parameters of an Al-Al alloy on the interface quality, Journal of Casting, Vol. 35, No. 113, pp. 29-33.

M.A. Rasooli, A. Taherizadeh, M. Farzin, A. Abdolah, M.R. Niroomand, (2016), Investigating the effects of process parameters on forming forces and defects formation in tube spinning process of AA6061, Modares Mechanical Engineering, Vol. 16, No. 12, pp. 186-194, 2016.

B. Sadeghian, M. Atapour, A. Taherizadeh, (2015), Simulation of Material Plastic Flow and Morphology During Friction Stir Welding of Stainless Steel to Aluminum Alloy Dissimilar Joint, Journal of Welding Science and Technology of Iran, Vol. 1, No. 1, pp. 24-37.

A. Taherizadeh, S. Torbat, A. Maleki, Iron and steel making technology selection based on a hybrid AHP-TOPSIS method, The 20th Iranian Steel Symposium, 27-28 Feb. 2018, Kish Island, Iran.

A. Taherizadeh, A. Eshaghian, Optimized design of the sizing calibre of rebar rolling line based on Finite Element Simulation, The 20th Iranian Steel Symposium, 27-28 Feb. 2018, Kish Island, Iran.

B. Sadeghian, A. Taherizdaeh, M. Atapour, Simulation of friction welding of stainless steel with Al alloy using FEM and ANN, 4^th International IMAT Conference, 10-11 Nov. 2015, Tehran, Iran.

M. Mikelani, Z. Noori, M. Panjepour, A. Taherizadeh, The effect of pore size on the mechanical properties of opencell nano material foam: predicted by Molecular Dynamics simulations, Int. Porous and Powder Materials Symposium and Exhibition, 15-18 Sept. 2015, Izmir, Turkey.

A. Taherizadeh, D. Green, J. Yoon. Anisotropic hardening model based on non-associated flow and combined nonlinear kinematic hardening for sheet metals, NUMISHEET2014, Melbourne, Australia.

A. Taherizadeh, D.E. Green, A. Ghaei. Simulation of earing using two anisotropic models: A quadratic non-associated. IDDRG 2009 International Conference, June 1-3, 2009, Golden, CO, USA.

A. Ghaei, A. Taherizadeh, D.E. Green. The effect of hardening model on springback prediction for a channel draw process. NUMISHEET2008, Int. Conference, Sept. 1-5, 2008, Interlaken, Switzerland. 

A. Taherizadeh, A. Ghaei, D.E. Green. Prediction of springback for a channel draw process using different hardening models. MS&T 2007, Int. Conference, September 16-20, 2007, Detroit, MI, USA. 

A. Taherizadeh, G. H. Daneshi. Mechanical analysis of hot strip rolling process - a new approach by using velocity function. Tehran Int. Congress on Manufacturing Eng., Dec. 12-15, 2005, Tehran, Iran.

A. Taherizadeh, G. H. Daneshi, Determination of the strain rate distribution using velocity distribution in hot strip rolling, 2nd National Metals and Materials Forming Conference, SUT, Tehran, Iran, 2004.